1.S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.

2.S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.

3.S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.

4.S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology.2015, 268, 24-29.

5.S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.

6.S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.

7.S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.

8.S. Dong,et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.

9.S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.

10.S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.

八、聯系方式：

1、Tel：027-87859057;

2、E-mail：dongsj@whut.edu.cn;dongsj1987@163.com

3、工作地址(實驗室)：硅酸鹽建筑材料國家重點實驗室301室

1. Name: Shujuan Dong

2. Brief introduction:

1) Date of birth: July 1987

2) Degree: Ph.D

3) Title: Research Professor

4) Working department: State Key Laboratory of Silicate Materials for Architectures

3. Education experience (after entering university):

2010.09-2014.12: University of Technology of Belfort-Montbeliard, Ph.D

2007.09-2010.06: Xi’an Jiaotong University, Master

2004.09-2007.06: Liaocheng University, Bachelor

4. Working experience:

2014.10-present: Wuhan University of Technology, Research Professor

2014.01-2014.10: University of Technology of Belfort-Montbeliard, ATER-Postdoc

5. Research field (no more than 3):

1) Materials synthesis and surface coating technology;

2) Surface treatment and preparation of high-performance coatings;

3) Design, preparation and characterization of thermal barrier coatings

6. Research project (no more than 5):

1) National Natural Science Foundation of China (Young Scholar Program);

2) Fundamental Research Funds for the Central Universities at Wuhan University of Technology;

3) Project of State Key Laboratory of Materials Processing and Die & Mould Technology;

4) Project of State Key Laboratory of Silicate Materials for Architectures

7. Representative papers and works (no more than 10):

1)S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.

2)S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.

3)S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.

4)S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology. 2015, 268, 24-29.

5)S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.

6)S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.

7)S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.

8)S. Dong, et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.

9)S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.

10)S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.

8. Contact information:

1) Tel: +86-027-87859057;

2) E-mail：dongsj@whut.edu.cn;dongsj1987@163.com

3) Addresses: Room 301, State Key Laboratory of Silicate Materials for Architectures

來源未注明“中國考研網”的資訊、文章等均為轉載，本網站轉載出于傳遞更多信息之目的，并不意味著贊同其觀點或證實其內容的真實性，如涉及版權問題，請聯系本站管理員予以更改或刪除。如其他媒體、網站或個人從本網站下載使用，必須保留本網站注明的"稿件來源"，并自負版權等法律責任。

來源注明“中國考研網”的文章，若需轉載請聯系管理員獲得相應許可。

聯系方式：chinakaoyankefu@163.com

在線輔導中心

2026考研英語全程班寒假班
權威高配師資親授技巧，教研千錘百煉科學提分。直錄播課相結合精講互動二合一，專業團隊精細化作文批改。講練結合，隨學隨練穩步提升。支持試聽~
主講團隊：王江濤、譚劍波、董仲蠡、許聰杰、陳志超、潘赟、鄭艷彤、易熙人